MPC-S10060K
- Constant current of high performance and high efficiency / support for high frequency charging mode with the way of constant current- constant voltage
- Wide range of battery charge and avai Table to charge with low current (0V IOOV, 0A 60A)
- Preventing from overcharging through battery capacity setting
- AC220V input SOA breaker included
- Overheating prevention function, Battery polarity connection Check alarm (In order to protecting Equipment)
- PC wireless control program (Optional)
Product Overview
High-Frequency Charger, MPC-S10060K, has a wide range of charging from 2V to 110V and 0.1A to 60A large capacity charging current that can charge and manage all batteries regardless of battery capacity. Simple settings allow you to use low-current charging, high-current fast charging, equal charging, and it is available to use for user’s batteries situation.
It is hard to charge old, neglected or high internal resistance batteries with a general chargers due to deactivation during crystallized sulfate and discharge cycles.
MPC-S10060K is able to charge constant current or constant current-constant voltage in range of high battery voltage, and also charge batteries with high internal resistance caused by performance degradation.
It is possible to charge with high-efficiency throughout high-frequency switching and CPU control. Voltage, current sensor and 16bit ADC are applied to automatically control voltage and current to protect the battery from overvoltage and overcharging.
Try freely charge and manage the battery regardless of voltage or capacity.
| Input Specification | |
| Input Power | AC 200V 240V |
| Input Frequency | 50Hz/ 60HZ |
| Input Phase | Single-phase |
| Input breaker specification | 50A breaker included |
| Charging Function | |
| Charge voltage range | DC 2.0 – 100.0V |
| Charge current range | 1.OA 60.0A |
| Charging mode Mode 1 | Constant current charge mode |
| Charging mode Mode 2 | Constant – Constant voltage charge mode |
| Voltage/current accuracy | Current: 1.0%/Voltage: 0.2~0.5% |
| Voltage/current unit | Current: 0.1A/Voltage: 0.01V |
| The way of charge data storage and control | USB Wireless communication and control PC (Optional) It finishes when reaching at set capacity |
| Charge capacity limit | It finishes when reaching at set capacity |
| User interface | |
| Display | 128 x 64 MONO-LCD |
| Input interface | Rotary & Push switch |
| Protocol interface | RS-232 |
| LED Display | 2-LED display Power, Charge |
| Alarm (Display on LCD screen) | – Battery connection status – Reverse battery electrode |
| Accessory | |
| Output cable | |
| Service information | |
| Operating temperature | 0°C 50°C (32°F 122°F) |
| Operation humidity | 5% 90% RH |
| Equipment instrument information | |
| Dimensions/ Weight | |
